Sender: <marv@lancaironline.net>
To:  lml@lancaironline.net
Date: Wed, 13 Mar 2013 13:21:40 -0400
Message-ID: <redirect-6119271@logan.com>
Received-SPF: pass
 receiver=logan.com; client-ip=209.85.223.170; envelope-from=toddlong1@gmail.com
Subject: Re: [LML] Re: vacuum hose
References: <list-6119116@logan.com>
From: Todd Long <toddlong1@gmail.com>
Content-Type: text/plain;
	charset=us-ascii
In-Reply-To: <list-6119116@logan.com>
Content-Transfer-Encoding: quoted-printable
Mime-Version: 1.0 (1.0)

How do most of you operate the pressurization system to avoid the major bump=
s at takeoff? My vacuum line was capped.=20

Typing and grammar errors courtesy of Siri and the iPhone.

On Mar 13, 2013, at 10:56, Paul Miller <pjdmiller@gmail.com> wrote:

> Autozone, lots of smaller sizes for vacuum hose by the foot.
> On 2013-03-13, at 10:51 AM, Colyn Case <colyncase@earthlink.net> wrote:
>=20
>> I'm looking for a minimum thickness vacuum hose just to hold the dukes pr=
essurization valve open on takeoff.  Right now I have a 1/4" i.d. .64" o.d. b=
ig fat rubber line.    I don't see anything on McMaster Carr that is thinner=
 wall.  But given it probably needs to handle maybe 10 psi of vacuum, the bi=
g fat rubber hoses seem like overkill.
>=20
>=20
> --
> For archives and unsub http://mail.lancaironline.net:81/lists/lml/List.htm=
l