Hi All,

After talking with Bob Pastesuk the other day about mounting a GoPRO camera he mentioned wanting to mount his on the tail tie down (Lancair IV).  This got me thinking right away as I have mine mounted inside the cockpit with the audio run into it but I like the idea of having the camera outside.  

This is what I ended up doing.  I got a 3/8" bolt about 2" long (this fits into the tie down hole in IV -- perhaps the other lancairs are similar in design) and an 1/4" bolt (which is a standard size for many camera mounts).   The end was cut off the 1/4" bolt.  I tapped the 3/8" bolt and inserted the 1/4" bolt into its head.    Thats pretty much it... a couple lock washer and flat washers rounded up the parts... cost was a couple bucks. 

If you're wanted to use a GoPRO camera, you'll need this little camera mount piece which you can buy on ebay (5 for $6 or so with free shipping).  http://www.ebay.com/itm/5-X-plastic-gopro-mount-adapter-monopod-tripod-camera-hero-2-selfshoot-universal-/261098065652?pt=LH_DefaultDomain_0&hash=item3ccaa84ef4&vxp=mtr

Most other digital cameras come with a 1/4" hole in the bottom of them and you can just screw these on with the part above.

Going to test it tomorrow.  I'll let you know if I don't come back with the camera.

Thats all there is to it.  See the attached pics!

-Dico


--
Regards,

Dico Reijers

InternetWorks Ltd.
300 University Avenue
Charlottetown
PE, C1A 4M4

902-892-4671 (T)
888-368-9484 (F)

www.internetworks.ca
www.apartmentspei.com