<<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
>>
Just a quick note about the filtering for your strobe power supply. I used
a dual pi network. For  those non electronics folks out there that means a
capacitor and inductor network in both the positive power lead AND the
negative lead as well. I also used shielded wire out to the wingtips. I
have NO strobe noise AT ALL in any of my radios.My supply is mounted on the
battery box which is behind the passenger seat. The power leads go forward
to the panel and through a breaker but the filter network I floxed right to
the battery box also. Hope this helps...

Lloyd