Sender: <marv@lancaironline.net>
To:  lml@lancaironline.net
Date: Mon, 24 Sep 2012 16:15:47 -0400
Message-ID: <redirect-5777683@logan.com>
Received-SPF: none
 receiver=logan.com; client-ip=209.86.89.66; envelope-from=douglasbrunner@earthlink.net
DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws;
  s=dk20050327; d=earthlink.net;
  b=SdSffPy1sg5xRlBoyYZe6bXyKV/HI4pOllucOLNSLLz7qmFRi/+MwDZbs6Q0YOvV;
  h=Received:From:To:References:In-Reply-To:Subject:Date:Message-ID:MIME-Version:Content-Type:Content-Transfer-Encoding:X-Mailer:Content-Language:Thread-Index:X-ELNK-Trace:X-Originating-IP;
From: "Douglas Brunner" <douglasbrunner@earthlink.net>
References: <list-5777142@logan.com>
In-Reply-To: <list-5777142@logan.com>
Subject: RE: [LML] Re: Jacking a Legacy
MIME-Version: 1.0
Content-Type: text/plain;
	charset="us-ascii"
Content-Transfer-Encoding: 7bit
Content-Language: en-us
Thread-Index: Ac2ab4LKxVuNSXX9SriysdBg0XfXLgAAOD6g

Stan,

I did basically the same thing.  I tapped a piece of steel and floxed it in
place on the spar of the stub wing.  A threaded metal cup screws into the
steel and is used as the jack point.

-----Original Message-----
From: Lancair Mailing List [mailto:lml@lancaironline.net] On Behalf Of Stan
Fields
Sent: Monday, September 24, 2012 12:13 PM
To: lml@lancaironline.net
Subject: [LML] Re: Jacking a Legacy

Doug,

Here is how I made a jack point on the outer Stub Wing Spar. You can do this
if you remove the wings.
http://www.lancairlegacybuilder.com/2012/Apr2012.html See April 19th log
entry.

Good Luck
Stan


-----Original Message-----
From: Lancair Mailing List [mailto:lml@lancaironline.net] On Behalf Of Berni
Breen
Sent: Saturday, September 22, 2012 1:45 PM
To: lml@lancaironline.net
Subject: [LML] Jacking a Legacy

For those Legacy pilots on the list...do you have any provisions to
accommodate jacking your airplane in the event of a flat tire while at an
airport other than your home base?  If so, what are those provisions?

I had a flat on my main co-pilot side today and did not have anything with
me to address the situation.  I was at a very friendly airport in Mobile,
Alabama ((KBFM) and they (Southern Avionics) took care of everything in a
matter of a few minutes, but if I would have been elsewhere...

Sent from my iPad
Berni Breen
Bbreen@cableone.net
--
For archives and unsub http://mail.lancaironline.net:81/lists/lml/List.html


--
For archives and unsub http://mail.lancaironline.net:81/lists/lml/List.html