lml@lancaironline.net Mailing List Archive

Thanks Bill, I had already talked to Reggie and he's all packed-up. he's heading overseas for a while and all his parts are boxed up. He sells them at the same cost as JPI. He has been a good source for the VM 1000. We are on our own for a while or buy from JPI.

thanks again

steve alderman

-----Original Message-----
From: William A. Hogarty <billhogarty@gmail.com>
To: lml <lml@lancaironline.net>
Sent: Sat, Sep 8, 2012 4:22 pm
Subject: [LML] Re: Fuel Pressure Transducer

Steve:

I dont know but like the fuel pressure sender, oil temp is oil temp.

I am sure that you could find a replacement but the wiring (voltage) has to be compatable.

If you dont get an answer from someone on the list, try Reggie Smith
(mooney37V@juno.com)

Regards, Bill H.

On Thu, Sep 6, 2012 at 8:01 AM, steve <n5276j@aol.com> wrote:

Bill, Thats great to know. By any chance do you know if they have a oil temp sender thats works with the VM-1000? Mine just went bad (100 hours) and I bought one from JPI for 200.00 bucks.

steve aldrman 360 25SA

-----Original Message-----
From: William A. Hogarty <billhogarty@gmail.com>
To: lml <lml@lancaironline.net>
Sent: Thu, Sep 6, 2012 6:15 am
Subject: [LML] Fuel Pressure Transducer

Just wanted to let the list know that the Fuel Pressure Transducer from Digikey,

for use with the VM-1000 Engine Moniter used with a TSIO 550E engine, works

perfectly and yes, I reversed the green and white wires per previous instructions.

If anyone needs the specifics on the transducer, although previously mentioned

on the list, I will be happy to provide them.

Regards, Bill H.