From: Clark.Baker@barclayscapital.com
Message-ID: <610E48E17B31D21181F300805F95CB720209C6BF@uxusr0005.ny.bzwint.com>
To: lancair.list@olsusa.com
Subject: LNC2 Exhaust Crack
Date: Wed, 9 Aug 2000 17:02:23 +0100 
Importance: high
Sensitivity: Company-Confidential
Reply-To: lancair.list@olsusa.com
Mime-Version: 1.0

          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> 
>>
With 190hrs TT, I noticed a crack on my 360 exhaust.  The crack was where
the #4 cylinder downtube meets the tailpipe. The crack was on the weld on
the back of that juncture, with the crack 1/2 way through the pipe.  I was
always concerned about the fairly long un-supported runs on the two
tailpipes, especially this one.  

My exhaust was coated with Jet-Hot about 5 hours ago; however, I find it
hard to believe this had any effect in that very short time period.  I could
not find anything in the archives and was wondering if anyone has
experienced this problem (and if any modifications were made).

Regards,
Clark Baker
250JF 
190hrs TT


--------------------------------------------------------------------------------------
For more information about Barclays Capital, please
visit our web site at http://www.barcap.com.

Internet communications are not secure and therefore the Barclays Group
does not accept legal responsibility for the contents of this message.
Any views or opinions presented are solely those of the author and do 
not necessarily represent those of the Barclays Group unless otherwise 
specifically stated.

--------------------------------------------------------------------------------------
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
LML website:   http://www.olsusa.com/Users/Mkaye/maillist.html
LML Builders' Bookstore:   http://www.buildersbooks.com/lancair

Please send your photos and drawings to marvkaye@olsusa.com.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>