Mailing List lml@lancaironline.net Message #62164
From: Ron Raby <ronr@advanceddesign.com>
Sender: <marv@lancaironline.net>
Subject: Re: [LML] Re: boost pump for engine cooling 4P
Date: Wed, 30 May 2012 11:59:14 -0400
To: <lml@lancaironline.net>
 Message Header

Undecoded Message
Walter
 
Do you recommend this for the IO550 also? I have been using low boost. I do not have engine cooling issues.
 
Regards
 
Ron Raby
----- Original Message -----
Sent: Tuesday, May 29, 2012 11:20 AM
Subject: [LML] Re: boost pump for engine cooling 4P


On May 29, 2012, at 9:09 AM, <bronnenmeier@GROBSYSTEMS.COM> <bronnenmeier@GROBSYSTEMS.COM> wrote:

Question: is it a reasonable practice to use the high boost for engine cooling? How long can it run in high boost without getting damaged?


We recommend using high boost on each climb through 10k.  Leave the boost pump on for AT LEAST 30 minutes after reaching cruise until the fuel in the tanks has a chance to cool.  It will not hurt the pump as they are designed to run continuously.

Walter Atkinson
Advanced Pilot Seminars
Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster