X-Virus-Scanned: clean according to Sophos on Logan.com Return-Path: Sender: To: lml@lancaironline.net Date: Sat, 14 Apr 2012 00:02:28 -0400 Message-ID: X-Original-Return-Path: Received: from fmailhost02.isp.att.net ([207.115.11.52] verified) by logan.com (CommuniGate Pro SMTP 5.4.4) with ESMTP id 5480316 for lml@lancaironline.net; Fri, 13 Apr 2012 12:49:17 -0400 Received-SPF: none receiver=logan.com; client-ip=207.115.11.52; envelope-from=bbradburry@bellsouth.net Received: from desktop (adsl-98-85-145-87.mco.bellsouth.net[98.85.145.87]) by isp.att.net (frfwmhc02) with SMTP id <20120413164843H02007qgtne>; Fri, 13 Apr 2012 16:48:43 +0000 X-Originating-IP: [98.85.145.87] From: "Bill Bradburry" X-Original-To: "'Lancair Mailing List'" References: In-Reply-To: Subject: RE: [LML] Re: Wing Gap Seal on Legacy X-Original-Date: Fri, 13 Apr 2012 12:48:47 -0400 X-Original-Message-ID: <281988E2F18348FFBE8FA92D71903D02@Desktop> MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0000_01CD1973.C522AD50" X-Mailer: Microsoft Office Outlook 11 Thread-Index: Ac0YWtOczgBUV3weTomkP9i/Gg429gBOUiUg X-MimeOLE: Produced By Microsoft MimeOLE V6.0.6002.18463 This is a multi-part message in MIME format. ------=_NextPart_000_0000_01CD1973.C522AD50 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit HI, Don! I have looked for you a couple of times when I was on the East side but didn't see you. Sorry I am so late answering your offer to help. I have been working on my taxes and didn't really know when that problem would get resolved. They are done now and I will get some tape and caulk and be at the airport tomorrow. If you are around you are certainly invited to help! I don't know if you can get in on the SW side, but if you need me to meet you at the gate you can call me at: 386-473-6535 And I will meet you. I am in hangar 92 now. That is the NW most hangar on the SW side. Bill _____ From: Lancair Mailing List [mailto:lml@lancaironline.net] On Behalf Of Don Gordon Sent: Wednesday, April 11, 2012 11:18 PM To: lml@lancaironline.net Subject: [LML] Re: Wing Gap Seal on Legacy Bill, I used bathtub calk sealant (white) on my Lancair 320. It works really well. You need to mask off either edge of the seam with painters tape. Remove the tape before the calking has a chance to dry. The calk will discolor with dirt somewhat as the months go by. I now also use a layer of sailplane white anti-peel tape over the top of the calk after it dries although it peels off at the leading edge after a while though its easily replaced. I can come over this weekend and help you if you like. Don Gordon N320DS - Lancair 320, 1900 hours Orlando, FL From: Lancair Mailing List [mailto:lml@lancaironline.net] On Behalf Of Bill Bradburry Sent: Wednesday, April 11, 2012 10:51 PM To: lml@lancaironline.net Subject: [LML] Wing Gap Seal on Legacy What type of RTV is suggested to use to seal the wing gap on the Legacy? Does anyone have a good technique to apply it without making a mess of it? Bill B ------=_NextPart_000_0000_01CD1973.C522AD50 Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable

HI, = Don!

I have looked for you a couple of = times when I was on the East side but didn’t see = you.

Sorry I am so late answering your = offer to help. I have been working on my taxes and didn’t really know = when that problem would get resolved. They are done now and I = will get some tape and caulk and be at the airport tomorrow. If you are around = you are certainly invited to help!

I don’t know if you can get = in on the SW side, but if you need me to meet you at the gate you can call me = at:

386-473-6535

And I will meet you. I am in = hangar 92 now. That is the NW most hangar on the SW = side.

Bill

From: = Lancair Mailing List = [mailto:lml@lancaironline.net] On Behalf Of Don Gordon
Sent: Wednesday, April = 11, 2012 11:18 PM
To: = lml@lancaironline.net
Subject: [LML] Re: Wing = Gap Seal on Legacy

Bill,

<= /o:p>

I used = bathtub calk sealant (white) on my Lancair 320. It works really well. You = need to mask off either edge of the seam with painters tape. Remove the = tape before the calking has a chance to dry. The calk will discolor = with dirt somewhat as the months go by. I now also use a layer of sailplane = white anti-peel tape over the top of the calk after it dries although it peels = off at the leading edge after a while though its easily replaced. I can = come over this weekend and help you if you like.

<= /o:p>

<= /o:p>

Don = Gordon

N320DS = – Lancair 320, 1900 hours

Orlando, FL

<= /o:p>

<= /o:p>

From: = Lancair Mailing List = [mailto:lml@lancaironline.net] On Behalf Of Bill Bradburry
Sent: Wednesday, April = 11, 2012 10:51 PM
To: = lml@lancaironline.net
Subject: [LML] Wing Gap = Seal on Legacy

What type of RTV is suggested to = use to seal the wing gap on the Legacy? Does anyone have a good technique = to apply it without making a mess of it?

Bill B

------=_NextPart_000_0000_01CD1973.C522AD50--