X-Virus-Scanned: clean according to Sophos on Logan.com Return-Path: Sender: To: lml@lancaironline.net Date: Fri, 06 Apr 2012 23:51:53 -0400 Message-ID: X-Original-Return-Path: Received: from p3plex2out04.prod.phx3.secureserver.net ([184.168.131.18] verified) by logan.com (CommuniGate Pro SMTP 5.4.4) with ESMTP id 5469881 for lml@lancaironline.net; Thu, 05 Apr 2012 12:07:33 -0400 Received-SPF: none receiver=logan.com; client-ip=184.168.131.18; envelope-from=pete@leapfrogventures.com Received: from P3PW5EX1HT005.EX1.SECURESERVER.NET ([72.167.180.47]) by p3plex2out04.prod.phx3.secureserver.net with bizsmtp id uG6z1i00411lQaG01G6zlJ; Thu, 05 Apr 2012 09:06:59 -0700 Received: from P3PW5EX1MB14.EX1.SECURESERVER.NET ([10.6.135.86]) by P3PW5EX1HT005.EX1.SECURESERVER.NET ([72.167.180.134]) with mapi; Thu, 5 Apr 2012 09:06:59 -0700 From: "pete@leapfrogventures.com" X-Original-To: Russell , "lml@lancaironline.net" X-Original-Date: Thu, 5 Apr 2012 09:07:19 -0700 Subject: RE: G900 software V10 autopilot communications Thread-Topic: G900 software V10 autopilot communications Thread-Index: Ac0TRiuleLRw4sggSnWH5H/zv2tWFQ== X-Original-Message-ID: <2A14E6258A8534418F5498D73CCA51EFAE4BBB98@P3PW5EX1MB14.EX1.SECURESERVER.NET> Accept-Language: en-US Content-Language: en-US X-MS-Has-Attach: X-MS-TNEF-Correlator: acceptlanguage: en-US Content-Type: multipart/alternative; boundary="_000_2A14E6258A8534418F5498D73CCA51EFAE4BBB98P3PW5EX1MB14EX1_" MIME-Version: 1.0 --_000_2A14E6258A8534418F5498D73CCA51EFAE4BBB98P3PW5EX1MB14EX1_ Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Russell, Do you have the EXT DG option on the Sorcerer turned OFF? If not, it shoul= d be off. I know this sounds counter-intuitive, but if set to ON it looks = for the EXT DG analog signal, and if turned OFF it gets the data from the G= 900. When installing the G900 software, did you install the GIA boot block updat= e first, then do the SW install? Pete From: Russell [mailto:n2aa@att.net] Okay, I've upgraded my Saucer autopilot the latest software and the Garmin = G900 software to version 10. I'm able to get barometric pressure to change = but unable to get heading and altitude settings from the G900. I have tried= every setting in the GIA page in the G900 with no success. Garmin & Tru Tr= ac has tried to help me through this, unfortunately no resolution at the mo= ment. I have heard that it does work but unable to reproduce it on my system. Has any of you done the upgrade to your systems and is it working? If so wh= at is your settings and what did you do to make it work? Thank you for your help Russell Steiner N2AA legacy --_000_2A14E6258A8534418F5498D73CCA51EFAE4BBB98P3PW5EX1MB14EX1_ Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable

Russell,

Do you have the EXT DG option on the Sorcerer turned OFF= ? If not, it should be off. I know this sounds counter-intuitiv= e, but if set to ON it looks for the EXT DG analog signal, and if turned OF= F it gets the data from the G900.

When installing the G900 software, did you i= nstall the GIA boot block update first, then do the SW install?<= /span>

Pete

From: Russell [mailto:n2aa@att.net] =

Okay, I've upgraded my Saucer autopilot the latest software an= d the Garmin G900 software to version 10. I'm able to get barometric pressu= re to change but unable to get heading and altitude settings from the G900.= I have tried every setting in the GIA page in the G900 with no success. Ga= rmin & Tru Trac has tried to help me through this, unfortunately no res= olution at the moment.

=

I have heard that it does work but unable to repro= duce it on my system.

<= /p>

Has any of you done the upgrade to your systems and= is it working? If so what is your settings and what did you do to make it = work?

Thank you for your help

Russell = Steiner

N2AA legacy

<= /p>

&nbs= p;

= --_000_2A14E6258A8534418F5498D73CCA51EFAE4BBB98P3PW5EX1MB14EX1_--