Brad,

I bled my brakes from the bottom up using a plunger style oil can.
Watch for bubbles appearing in the reservoir.  Keep at it until there
are no more bubbles.

Mark
ES

On 1/8/12, Brad jepp <brad4666k@yahoo.com> wrote:
> Does anyone know the best way to bleed the brakes? I replaced the "O" rings
> in the brake caliper because I had a slow drip. I was careful to remove the
> line
> from the caliper and then capped off the line while I had the caliper off. I
> installed the caliper after replacing the "O" rings and then screwed on the
> flexible line and had someone
> inside apply pressure to the brake (like in a car) and loosened the bottom
> bleeder valve until fluid ran out. brake is still spongy . Any help on this
> would be great. Brad- LIV
>