Today I spoke with a CFII who was asking me for help regarding an issue
he has with a pilot who owns a Lancair 4p.
I am not calling names, so in case he is a follower of the LML, he can
take your advices.
This plane has tons of issues, as a matter of fact the Cfii told me
that from the last 11 flights he had, 10 had emergencies, like engine out,
total loss of electrical power etc etc.
The plane has an OP technologies (old setup) avionics who is not
working right etc.
Above all this the owner is a low time pilot, and according to the CFII
he is flying the plane with 2 hands on the stick because he doesn't know how
to use the trim.
So when I was hearing this I was shocked and told him that he should
first get the plane checked out by somebody like Charlie Kohler and than fix
it and than sell it.
The CFII told me that he already told him this but that he was stubborn
and doesn't want to sell.....
Now this is a next statistic waiting to happen and I really feel bad,
so what would you do?
Ronald (110 hours Lancair 4p, 1400 hours with other planes
lol)
On Nov 11, 2011, at 2:31 PM, "Russell" <
n2aa@att.net> wrote:
Originally I tried to be clever with installing mine in
the copilots naca vent. This did not work, we got erroneous numbers. The
probe needs to be out completely in the air to give you proper
information.
Mine is now installed on my legacy on the bottom side
of the stub wing in front of the spar about 6 inches away from the
fuselage. This gave me easy access through the access cover inside the
cabin. Or easier said, almost in front of the spar inner bolt. In that
position we were receiving accurate temperatures and
information.
Regards
Russell Steiner
Legacy N2AA
G900
panel