Could be worse. You could have an Aspen Avionics unit where the AHARS is an
all-in-one with no ability to make the temperature remote.  I have the unit
mounted inside (as we can do with e-glass planes) but the temperature is now
useless.

Matt

-----Original Message-----
From: Lancair Mailing List [mailto:lml@lancaironline.net] On Behalf Of GENE
CASH
Sent: Thursday, November 10, 2011 12:15 PM
To: lml@lancaironline.net
Subject: [LML] OAT Location

For those of you with an AHARS unit used with a glass panel, where  
are you locating your OAT probe?  I have a Dynon Skyview and it says  
do not locate the probe in the sun which rules out the top of the  
fuselage, in the vicinity of engine heat which rules out the bottom  
(exhaust) or exposed to cabin heat at the rear of the probe which  
nixes the clever idea I saw one dude use by mounting the probe in the  
cabin air NACA inlet.  Now I don't have a clue.  Any input appreciated.

GC
LFG

--
For archives and unsub http://mail.lancaironline.net:81/lists/lml/List.html