Mailing List lml@lancaironline.net Message #58416
From: jon hadlich <hackmo15@gmail.com>
Sender: <marv@lancaironline.net>
Subject: Change the speed of the ROC servo for trim
Date: Sun, 29 May 2011 16:47:41 -0400
To: <lml@lancaironline.net>
 Message Header

Undecoded Message
Ray Allen has a speed controller. I'm pretty sure it just limits the voltage to the motor and that slows it down. If you're running 12v servos with 24v , that also would make the servo run very fast. Change to 12v if it is a 12v servo.

--
Jon Hadlich
AI Systems
(541) 815-7381
Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster