Return-Path: Received: from dskfw2.funb.com ([168.175.254.62]) by ns1.olsusa.com (Post.Office MTA v3.5.3 release 223 ID# 0-64832U3500L350S0V35) with ESMTP id com for ; Wed, 14 Jun 2000 11:10:04 -0400 Received: (from uucp@localhost) by dskfw2.funb.com (8.8.5/8.8.5) id LAA08943 for ; Wed, 14 Jun 2000 11:16:08 -0400 (EDT) Received: from clt-msw-01.funb.com(168.175.76.103) by dskfw2.funb.com via smap (V2.0) id xma008496; Wed, 14 Jun 00 11:15:37 -0400 Received: from cltastr02.capmark.funb.com (unverified) by clt-msw-01.capmark.funb.com (Content Technologies SMTPRS 4.1.5) with ESMTP id for ; Wed, 14 Jun 2000 11:15:36 -0400 Received: from clt-conn-01.capmark.funb.com (unverified) by cltastr02.capmark.funb.com (Content Technologies SMTPRS 2.0.15) with ESMTP id for ; Wed, 14 Jun 2000 11:16:37 -0400 Received: by clt-conn-01.capmark.funb.com with Internet Mail Service (5.5.2650.21) id ; Wed, 14 Jun 2000 11:14:15 -0400 Message-Id: From: "Hapgood, Matt" To: Lancair List Subject: Lousy 360 cowl fit Date: Wed, 14 Jun 2000 11:14:03 -0400 X-Mailing-List: lancair.list@olsusa.com Mime-Version: 1.0 <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> << Lancair Builders' Mail List >> <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> >> First Union Securities, Inc. Can someone please tell me what they did to address this problem? Thanks, Matt Do all the 360's have such a lousy fit at the upper cowl section where it meets the header tank??? The joggle at the middle of the header is only about 1/32", but the cowl is closer to 1/8" thick! SO are most people adding 3/32" of filler behind the cowl there? Or removing some of the cowl material on the inside where it meets the joggle?? >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> LML website: http://www.olsusa.com/Users/Mkaye/maillist.html LML Builders' Bookstore: http://www.buildersbooks.com/lancair Please send your photos and drawings to marvkaye@olsusa.com. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>