Return-Path: Received: from spdmgaad.compuserve.com ([149.174.206.137]) by ns1.olsusa.com (Post.Office MTA v3.5.3 release 223 ID# 0-64832U3500L350S0V35) with ESMTP id com for ; Tue, 13 Jun 2000 15:20:03 -0400 Received: (from mailgate@localhost) by spdmgaad.compuserve.com (8.9.3/8.9.3/SUN-1.9) id PAA19064 for lancair.list@olsusa.com; Tue, 13 Jun 2000 15:26:08 -0400 (EDT) Date: Tue, 13 Jun 2000 15:25:40 -0400 From: "Chas R. Miller" <76132.1147@compuserve.com> Subject: vpre-cut elevator idler bob wt arms Sender: "Chas R. Miller" <76132.1147@compuserve.com> To: Marvin Kaye Message-ID: <200006131525_MC2-A899-BED8@compuserve.com> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Disposition: inline X-Mailing-List: lancair.list@olsusa.com <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> << Lancair Builders' Mail List >> <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> >> George, Re: LNC2 bob wt arms, the holes pre drilled in my parts didn't line up either. IMHO, nothing should have a sloppy fit, so I called Vern at Lancair and he replaced my parts. With the replacements, I could put four #12 drills through the four holes with the parts on top of one another and the 3/4"+ holes lined up, as well as the outside edges. Chas Miller, N362M - 10% >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> LML website: http://www.olsusa.com/Users/Mkaye/maillist.html LML Builders' Bookstore: http://www.buildersbooks.com/lancair Please send your photos and drawings to marvkaye@olsusa.com. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>