<<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
>>

Rob,
I added a lip on the floor to prevent rearward movement.  Cover the end of the
seat pan with release tape and install it (the 3-bid flange must already be in
place).  Build up a ramp of micro on the floor behind the seat pan.  When cured
pop the seat out.  With the seat removed, I also added a ply of fiberglass over
the micro to prevent chipping.  Now the rear edge of the seat pan must be lifted
slightly before it can be pulled out of the 3-bid flange.  

Chris Zavatson
360 std
N91CZ
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
LML website:   http://www.olsusa.com/Users/Mkaye/maillist.html
LML Builders' Bookstore:   http://www.buildersbooks.com/lancair

Please send your photos and drawings to marvkaye@olsusa.com.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>