Return-Path: <lancair.list-request@olsusa.com>
Received: from dskfw2.funb.com ([168.175.254.62]) by ns1.olsusa.com
          (Post.Office MTA v3.5.3 release 223 ID# 0-64832U3500L350S0V35)
          with ESMTP id com for <lancair.list@olsusa.com>;
          Mon, 12 Jun 2000 09:21:11 -0400
Received: (from uucp@localhost) by dskfw2.funb.com (8.8.5/8.8.5) id JAA06138 for <lancair.list@olsusa.com>; Mon, 12 Jun 2000 09:27:14 -0400 (EDT)
Received: from clt-msw-01.funb.com(168.175.76.103) by dskfw2.funb.com via smap (V2.0)
	id xma004991; Mon, 12 Jun 00 09:26:03 -0400
Received: from cltastr02.capmark.funb.com (unverified) by clt-msw-01.capmark.funb.com
 (Content Technologies SMTPRS 4.1.5) with ESMTP id <Ta8af4c67884cc0a1a31f@clt-msw-01.capmark.funb.com> for <lancair.list@olsusa.com>;
 Mon, 12 Jun 2000 09:15:33 -0400
Received: from clt-conn-01.capmark.funb.com (unverified) by cltastr02.capmark.funb.com
 (Content Technologies SMTPRS 2.0.15) with ESMTP id <B0001396180@cltastr02.capmark.funb.com> for <lancair.list@olsusa.com>;
 Mon, 12 Jun 2000 09:16:56 -0400
Received: by clt-conn-01.capmark.funb.com with Internet Mail Service (5.5.2650.21)
	id <LK91J1YM>; Mon, 12 Jun 2000 09:14:23 -0400
Message-Id: <CA33F0348ED9D21187CF0008C7CF284C02AA5D92@CLT-EXCH-05>
From: "Hapgood, Matt" <matt.hapgood@funb.com>
To: lancair.list@olsusa.com
Subject: 360 Cowl fit...
Date: Mon, 12 Jun 2000 09:14:23 -0400
X-Mailing-List: lancair.list@olsusa.com
Mime-Version: 1.0

          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> 
>>
First Union Securities, Inc.

Hello all..

My 360 is darn close to being finished.  Firewall forward is basically done,
and at this point I have to balance the control surfaces and finish the
awful job I have been dreading - the cowl.

I really need to pull a mold and start over, I just can't stand the thought
of spending the money.  Do all the 360's have such a lousy fit at the upper
cowl section where it meets the header tank???  The joggle at the middle of
the header is only about 1/32", but the cowl is closer to 1/8" thick!  SO
are most people adding 3/32" of filler behind the cowl there?  Or removing
some of the cowl material on the inside where it meets the joggle??

Thanks,

Matt

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
LML website:   http://www.olsusa.com/Users/Mkaye/maillist.html
LML Builders' Bookstore:   http://www.buildersbooks.com/lancair

Please send your photos and drawings to marvkaye@olsusa.com.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>