<<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
>>
> I have the same problem with my 320 Landing Gear.
>
Have checked all wiring etc and found nothing wrong. Talked to
Lancair and they suggested swaping Low Pressure Relays. Have not
tried this yet. Will advise if I find a solution..

Mike -
Apparantly quite a few builders and pilots have encountered this
failure to retract (or extend) problem, both on the jackstand during
building and while flying.
If Lancair's suggestion to replace your low pressure switch corrects
the problem, then both older and newer low and high pressure switches are
failure candidates.

Bill Rumburg
N403WR  (Sonic bOOm)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
LML website:   http://www.olsusa.com/Users/Mkaye/maillist.html
LML Builders' Bookstore:   http://www.buildersbooks.com/lancair

Please send your photos and drawings to marvkaye@olsusa.com.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>