I could use a GNS-430W and/or a KX-125
Nav/Com if you have either.
Danny
Miller
N 38° 43'
27"
W 77° 30'
38"
From:
Bob Smiley [mailto:rsmiley2@centurytel.net]
Sent: Wednesday, October 13, 2010
10:19 PM
To: lml@lancaironline.net
Subject: RE: [LML] Re: 320/360
glare shield needed
Gary,
I have a 360 glare shield
covered with ¼ inch foam and then covered with black leather. The leather
is curved around the front edge without a sewing seam and no wrinkles. It
mounts with only three screws and finishing washers. It looks very
nice. Do you want it?
Bob Smiley
360-297-0596 home/fax
360-731-0269 cell
Rsmiley2@centurytel.net
I have a whole 360 to part
out. This is item no 2. If you guys need anything let me know.
From:
Lancair Mailing List [mailto:lml@lancaironline.net] On Behalf Of Gary Fitzgerald
Sent: Wednesday, October 13, 2010
8:53 AM
To: lml@lancaironline.net
Subject: [LML] Re: 320/360 glare shield
needed
The
glare shields and the instrument panels disappeared from the parts list on the
web site about 4 years ago, although the instrument panels make occasional
reappearances. At one of the LOBO seminars, I learned from another
builder that it is possible to cut up a Legacy glare shield to fit an
320/360. That’s what I plan to do.
Gary
Fitzgerald
LNC2
~70%
Engine:
TBD
St.
Charles, MO
From:
Lancair Mailing List [mailto:lml@lancaironline.net] On Behalf Of Guy and Jill Foreman
Sent: Sunday, October 10, 2010
9:58 AM
To: lml@lancaironline.net
Subject: [LML] 320/360 glare
shield needed
Just wondering if somone has a 320/360 glare
shield/ dust cover that they were willing to sell. If so , please let me know.
Thanks,
Guy Foreman
guyjill01@hotmail.com
219-477-5424