Sender: <marv@lancaironline.net>
To:  lml@lancaironline.net
Date: Wed, 26 May 2010 13:41:35 -0400
Message-ID: <redirect-4326984@logan.com>
Received-SPF: none
 receiver=logan.com; client-ip=206.190.48.67; envelope-from=visfishdo@yahoo.com
DomainKey-Signature:a=rsa-sha1; q=dns; c=nofws;
  s=s1024; d=yahoo.com;
  h=Message-ID:X-YMail-OSG:Received:X-Mailer:Date:From:Subject:To:MIME-Version:Content-Type;
  b=pM7wsXPUaXyaTO6b6p0v6l1jZlMc0FRvGZYRhkgh9G/TFBX2nCXLlaxXet8+0QW5E3bvhFlmUNsGBnuXQ8Fnom1DsEzoMXxnE2P9UbkCz/Gt97cr6DDrlHFAvoKCpct72eEXNMqGBKhKsNVN4V6gDB+RAYcCcxIZgeqzZHEXTwg=;
From: Doug owen <visfishdo@yahoo.com>
Subject: XE vision lights
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii

Hi. 
I have a pair of the XE vision lights mounted in the winglets. I believe it is the XV23 model. I elected to mount the transformer in the cabin to avoid any water issues, and ran the lines in the leading edge. So far I have found them to be very reliable and dependable. Perhaps not quite as brite as advertised, but very acceptable. I did have a bit of issue with shaping a leading edge lens. I found a company in southern california that was able to fashion some acceptable lenses. 

I will try to get to the hangar in the next day or two and find the name of the lens company, as well as forward some photos. 

Generally I would give the lights a positive review. 


Good luck!
Doug Owen