Posted for "Gary Rodgers"
<gcrodgers@sympatico.ca>:
Interesting to see interest in intumescent coatings. If you do a search of
archives
using 'intumescent, I was advocating this type of product in Nov
2004 and earlier . Over the years there has been a lot
of interest in fire
proof/resistant FRP, but really what is needed is something that will
protect the FRP from the
heat. While resins can be formulated to offer
certain levels of resistance to flammability, it is really the heat the
is
the enemy. Resins quickly lose their strength at tg. For engine
compartments and the area around the
avionics (inside the fuselage firewall
and forward to the side windows), I highly recommend intumescent coating.
Both of
those areas have the means to have a fire supported by a source
other than the resin in the FRP/Carbon
Fibre.
Regards
Gary Rodgers
_____
From: marv@lancair.net
[mailto:marv@lancair.net]
Sent: Thursday, December 17, 2009 08:58
To: lml@lancaironline.net
Subject: Re: [LML] Fwd:
Emailing: IMG_0276, IMG_0223
Posted for "Jeffrey W. Skiba" <jskiba@icosa.net>:
Do you have rough
cost estimate, what the coating is actually called
"street
name ?" and contact info for Marv at
Diemech
Thanks
Jeff.
[I thought I included contact info... JIC
anyone missed it, my email is
marv@lancair.net, business phone is 386-295-9279. The product's trade name
is Thermo-Lag
3000. I'll be happy to share additional info or answer
questions, preferably here so everyone can benefit.
<Marv> ]
Subject: [LML] Fwd: Emailing: IMG_0276,
IMG_0223
I thought some of you may be interested in an alternative to the standard
firewall blanket
that I, and several others, have used. It's an intumescent
coating product. Its used occasionally in the
construction industry to
achieve fire ratings on steel structures. It would be used more but the
cost
is
significantly higher than stand fireproofing or wrap assemblies. It's
only
used when esthetics are a concern and you
want to expose the structure.
Diemech Turbines sells it with their Turbine Conversion kit. It's applied
in
(2)
3/32" thick coats. When exposed to fire it expands filling voids. It
allows you to have a really nice finish on your
fire wall - if that's of
interest to anyone - it was me. Don't quote me but I believe the UL rating
for this thickness
is 3 hrs and I can't remember at what temps. I tested a
small section applied to carbon with a touch and it worked. If
you're
interested I'd contact Marv at Diemech for details.
|