Simple...I could not get the leaks out of the line going to the top port on
the wing...step one in the ops checklist, and after "final assembly." The
other inputs to the AOA computer tested fine, but that one just insisted on
leaking--just a little, but definitely a leak. Main problem was that I
started at the instrument and worked toward the winglet were it was
installed...instead of starting at the other end...:-(

Bob

-----Original Message-----
From: Lancair Mailing List [mailto:lml@lancaironline.net] On Behalf Of Colyn
Case at earthlink
Sent: Wednesday, November 04, 2009 10:27 AM
To: lml@lancaironline.net
Subject: [LML] Re: AOA installation question

ok Bob, how did you discover this?


--
For archives and unsub http://mail.lancaironline.net:81/lists/lml/List.html