I'm building a legacy and some of my
struts have gone bad. Does anyone know the part number for the main
gear, nose gear and for the canopy?
Thanks N72LE still building
Larry Eversmeyer
marv@lancair.net
Sent by: "Lancair Mailing List"
<lml@lancaironline.net>
06/12/2009 03:37 PM
|
Please respond to
"Lancair Mailing List" <lml@lancaironline.net> |
|
|
To
| <lml@lancaironline.net>
|
|
cc
|
|
|
Subject
| [LML] Re: gas strut |
|
Posted for Brad jepp <brad4666k@yahoo.com>:
Does anyone have the PN # for the gas strut on a IV for the nose gear?
Mcmaster or Aerocraft parts. Thanks Brad
[ timing is everything... had a customer call about this very thing earlier
in the week... following is excerpted from my reply to him: You
can get them from McMaster Carr (http://www.mcmaster.com/)
and the part number is 9416K15. Just put that number in their search
window and the catalog page should come up. They also make the same
cylinder in stainless, that part number is 4175T5. In either case,
the strut is supposed to be 100-120 psi of force, personally I’d go with
the higher number. <Marv> BTW, the threaded ends
of the cylinders are 6mmx1mm thread, should fit your existing ends just
fine. They show replacement ends on the next page... get what works
for you if you feel the need.]
--
For archives and unsub http://mail.lancaironline.net:81/lists/lml/List.html
|