|
|
I bought Lord J-7402-1 engine mounts from Lancair in 1998. These mounts are very soft. They are sagging. I put a washer under the bottom mounts in about 2002. This year I changed the front and back half's of the top mounts. That doesn't take much work. It helped a little.
Lorn
----- Original Message -----
From: "Mark Ravinski" <mjrav@comcast.net>
Date: May 11, 2009 8:23:52 PM GMT-04:00
Another low cost option is to swap the upper mounts that have been stretched with the lower ones that have been compressed. Good to go for another 50,000 miles.
Mark Ravinski
360 1463 hrs.
----- Original Message -----
From: Keith Smith
Sent: Saturday, May 09, 2009 5:18 PM
A guy walked up to my 360 this morning and noticed that the bottom of the spinner is rubbing against the bottom cowl. "you couldn't squeeze a leaf in there," he said. Clearance from the top cowl is good, though.
Is it just a matter of reseating the bottom cowl?
Keith...a newbie owner still learning the basics of aircraft ownership.
1998 I bought Lord J-7402-1 engine mounts
--
Lorn H. 'Feathers' Olsen, MAA, ASMEL, ASES, Comm, Inst
DynaComm, Corp., 248-345-0500, mailto:lorn@dynacomm.us
LNC2, FB90/92, O-320-D1F, 1,550 hrs, N31161, Y47, SE Michigan
|
|