Return-Path: Received: from dfw.nationwide.net ([198.175.15.10]) by truman.olsusa.com (Post.Office MTA v3.1.2 release (PO203-101c) ID# 0-44819U2500L250S0) with ESMTP id AAA5107 for ; Sat, 12 Sep 1998 12:06:49 -0400 Received: from arrowplastics.com (acp.arrowplastics.com [204.155.155.46]) by dfw.nationwide.net (8.9.0/8.9.0) with SMTP id LAA12131 for ; Sat, 12 Sep 1998 11:03:30 -0500 (CDT) Received: from Primary-Message_Server by arrowplastics.com with Novell_GroupWise; Sat, 12 Sep 1998 11:02:53 +0100 Message-Id: X-Mailer: Novell GroupWise 4.1 Date: Sat, 12 Sep 1998 17:02:29 +0100 From: Dick Simkanin To: lancair.list@olsusa.com Subject: RUDDER GEARS X-Mailing-List: lancair.list@olsusa.com Mime-Version: 1.0 <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> << Lancair Builders' Mail List >> <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> >> If anyone is interested in getting a set of rudder gears for their Lancair IV or IV-P, I have a limited quantity that I will sell for $200.00 a set. I believe they will also fit the ES, but I'm not sure. These gears will eliminate the free movement in the rudder peddles, tying the peddles together via the two horizontal torque tubes under the instrument panel. The gears are made from stainless steel with stainless steel bolts included. NO drilling holes or disassembly required. Just find a clear area somewhere on the two horizontal torque tubes and bolt them on. Thats all there is to the installation. You can see what the gear set looks like by going to my web site at www.arrowplastics.com. Click on the HOME icon, then click on AIRCRAFT PART at the bottom of the page. My e-mail address is dick@arrowplastics.com, or you can give me a call at 817 540 1892 ext. 204. Dick Simkanin N80D > Lancair IV-P