X-Virus-Scanned: clean according to Sophos on Logan.com Return-Path: Sender: To: lml@lancaironline.net Date: Thu, 16 Apr 2009 22:17:12 -0400 Message-ID: X-Original-Return-Path: Received: from mail7.tpgi.com.au ([203.12.160.103] verified) by logan.com (CommuniGate Pro SMTP 5.2.13) with ESMTPS id 3583011 for lml@lancaironline.net; Thu, 16 Apr 2009 05:00:20 -0400 Received-SPF: pass receiver=logan.com; client-ip=203.12.160.103; envelope-from=domcrain@tpg.com.au X-TPG-Junk-Status: Message not scanned X-TPG-Antivirus: Passed Received: from DomandJanPC (60-241-193-89.static.tpgi.com.au [60.241.193.89]) by mail7.tpgi.com.au (envelope-from domcrain@tpg.com.au) (8.14.3/8.14.3) with ESMTP id n3G8xapx020354 for ; Thu, 16 Apr 2009 18:59:37 +1000 From: "Dominic V. Crain" X-Original-To: "'Lancair Mailing List'" References: In-Reply-To: Subject: RE: [LML] Re: Gear Free Fall X-Original-Date: Thu, 16 Apr 2009 18:59:36 +1000 X-Original-Message-ID: <007901c9be71$ac148e60$043dab20$@com.au> MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_007A_01C9BEC5.7DC09E60" X-Mailer: Microsoft Office Outlook 12.0 Content-Language: en-au Thread-Index: Acm+Go/ubbF6ZH53TqWYz2UMLtqk1gAVv7dw This is a multipart message in MIME format. ------=_NextPart_000_007A_01C9BEC5.7DC09E60 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit G'day Bill, What's the Lancair Part number for the LNC NG gas strut if you have please. Cheers Dom From: Lancair Mailing List [mailto:lml@lancaironline.net] On Behalf Of Bill Sent: Thursday, 16 April 2009 8:36 AM To: lml@lancaironline.net Subject: [LML] Re: Gear Free Fall Hello Dom, In our 320 and others that I've flown you either have to wait quite a while for the mains to lock down or, more preferably, a slight yaw with the rudder will do the trick (step on the side you want to lock). I believe that this is normal. From your post "most likely in the air" I assume that you haven't tried it in the air? You should. I do a free fall test in the air about once a month. (slow down, pull the big gear breaker AND the gear relay breaker, gear switch down, open the valve). In ours, I usually need to "help" the right gear a little with rudder. Yes, the nose should be first to lock. If it's getting lazy, you're probably due for a new gas strut. This is a normal maintenance item, I replace mine probably every 3 or 4 years. If you replace the nose strut, time the extension with the new strut. That will give you a baseline number so that you'll know when it's starting to get weak. Bill Harrelson N5ZQ 320 1,650 hrs N6ZQI IV under construction new email: n5zq "at" verizon.net ----- Original Message ----- From: Dominic V. Crain To: lml@lancaironline.net Sent: Wednesday, April 15, 2009 7:51 AM Subject: [LML] Gear Free Fall I'd like to draw on the opinion of listers regarding LNC2 gear free fall problem. The main gear is slow to free fall, and on the jacks (most likely in the air) the RMG won't lock in. Slight pressure on the wheel locks it in, which is handy if one wing walks upside down. Disconnected the actuator strut and it drops like a beauty and snaps into position. I doubt the actuator struts are the problem because both main gear have exhibited the same problem at the same time. The LMG does eventually lock down on the jacks. One thing I've noticed is the NG is slower to lock down under normal extension than it usually does. Until recently, it was always the first, and quick to lock down. Under free fall the gas strut dives the NG down and locks as it should quite quickly. Wondered if anyone might have a trouble shooting sequence I can draw upon. Thanks Dom Crain VH-CZJ ------=_NextPart_000_007A_01C9BEC5.7DC09E60 Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable

G’day = Bill,

What’s the Lancair Part number for the LNC NG gas strut if you have = please.

Cheers

Dom

 

From: Lancair Mailing List [mailto:lml@lancaironline.net] On Behalf Of Bill
Sent: Thursday, 16 April 2009 8:36 AM
To: lml@lancaironline.net
Subject: [LML] Re: Gear Free Fall

 

Hello Dom,

 

In our 320 and others that I've flown you either have to wait quite a while = for the mains to lock down or, more preferably, a slight yaw with the rudder = will do the trick (step on the side you want to lock). I believe that this is normal. From your post "most likely in the air" I assume that = you haven't tried it in the air? You should. I do a free fall test in the = air about once a month. (slow down, pull the big gear breaker AND the gear relay = breaker, gear switch down, open the valve). In ours, I usually need to = "help" the right gear a little with rudder. 

 

Yes, the nose should be first to lock. If it's getting lazy, you're probably = due for a new gas strut. This is a normal maintenance item, I replace mine = probably every 3 or 4 years. If you replace the nose strut, time the extension = with the new strut. That will give you a baseline number so that you'll know when = it's starting to get weak.

 

Bill Harrelson

N5ZQ 320 1,650 hrs

N6ZQI  IV under construction

 

new email:   n5zq "at" verizon.net

 

 

 

 

 

 

----- Original Message -----

Sent:<= /b> Wednesday, = April 15, 2009 7:51 AM

Subject: [LML] Gear = Free Fall

 

I’d like to = draw on the opinion of listers regarding LNC2 gear free fall = problem.

The main gear is = slow to free fall, and on the jacks (most likely in the air) the RMG won’t lock = in.

Slight pressure on = the wheel locks it in, which is handy if one wing walks upside = down.

Disconnected the = actuator strut and it drops like a beauty and snaps into = position.

I doubt the = actuator struts are the problem because both main gear have exhibited the same problem = at the same time. The LMG does eventually lock down on the = jacks.

One thing = I’ve noticed is the NG is slower to lock down under normal extension than it usually does. = Until recently, it was always the first, and quick to lock down. Under free = fall the gas strut dives the NG down and locks as it should quite = quickly.

Wondered if anyone = might have a trouble shooting sequence I can draw upon.

Thanks

Dom = Crain

VH-CZJ

------=_NextPart_000_007A_01C9BEC5.7DC09E60--