Mailing List lml@lancaironline.net Message #50488
From: Dominic V. Crain <domcrain@tpg.com.au>
Sender: <marv@lancaironline.net>
Subject: RE: [LML] Re: Ryan 9900B segue to ATD 300
Date: Mon, 23 Feb 2009 21:51:14 -0500
To: <lml@lancaironline.net>

Hiya Scott, AKA Grayhawk the considerably less than the unwretched.

 

Methinks must thank you for the info.

Notwithstanding my medieval mental state I have a blurred recollection of your incident, which you must have related at Bill’s and Sue’s back in ’05.

My ATD antenna is the standard which came with the unit. I run it through a Coax attached to the instrument combing to the unit. It makes no difference if the antenna is connected at the back of the antenna. The TXPDR post antenna is behind the now defunct battery box position.

On the positive side, if there is traffic around, it responds correctly with distance and altitude diff.

As usual I’ll just fiddle around and see if I can improve or eliminate.

Cheers Mate

Dom

 

Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster