X-Virus-Scanned: clean according to Sophos on Logan.com Return-Path: Sender: To: lml@lancaironline.net Date: Sat, 05 Jul 2008 07:58:37 -0400 Message-ID: X-Original-Return-Path: Received: from ndmsnpf02.ndc.nasa.gov ([198.117.0.122] verified) by logan.com (CommuniGate Pro SMTP 5.2.5) with ESMTP id 3010382 for lml@lancaironline.net; Thu, 03 Jul 2008 13:00:18 -0400 Received-SPF: none receiver=logan.com; client-ip=198.117.0.122; envelope-from=michael.s.reinath@nasa.gov Received: from ndmsppt03.ndc.nasa.gov (ndmsppt03.ndc.nasa.gov [198.117.0.102]) by ndmsnpf02.ndc.nasa.gov (Postfix) with ESMTP id 3919110810C for ; Thu, 3 Jul 2008 11:59:38 -0500 (CDT) Received: from ndmsxgw04.ndc.nasa.gov (ndmsxgw04.ndc.nasa.gov [129.166.9.162]) by ndmsppt03.ndc.nasa.gov (8.14.1/8.14.1) with ESMTP id m63Gxc6l032724 for ; Thu, 3 Jul 2008 11:59:38 -0500 Received: from NDMSEVS34B.ndc.nasa.gov ([129.166.9.32]) by ndmsxgw04.ndc.nasa.gov with Microsoft SMTPSVC(6.0.3790.3959); Thu, 3 Jul 2008 11:59:37 -0500 Received: from 129.166.9.17 ([129.166.9.17]) by NDMSEVS34B.ndc.nasa.gov ([129.166.9.8]) via Exchange Front-End Server mail02.ndc.nasa.gov ([129.166.9.177]) with Microsoft Exchange Server HTTP-DAV ; Thu, 3 Jul 2008 16:58:45 +0000 User-Agent: Microsoft-Entourage/11.3.6.070618 X-Original-Date: Thu, 03 Jul 2008 09:58:44 -0700 Subject: Re: [LML] Re: Question about Hydraulic Pump From: "Reinath, Michael" X-Original-To: Lancair Mailing List X-Original-Message-ID: Thread-Topic: [LML] Re: Question about Hydraulic Pump Thread-Index: AcjdLg02S5dljkkhEd2iWgADkxkwcA== Mime-version: 1.0 Content-type: text/plain; charset="US-ASCII" Content-transfer-encoding: 7bit X-OriginalArrivalTime: 03 Jul 2008 16:59:38.0151 (UTC) FILETIME=[2D7DC370:01C8DD2E] X-Proofpoint-Virus-Version: vendor=fsecure engine=1.12.7160:2.4.4,1.2.40,4.0.166 definitions=2008-07-03_07:2008-07-02,2008-07-03,2008-07-03 signatures=0 >>For the reversed spool valve problem, could one not also just flip the lines >>on the ports ? aka cross them ... meaning if high was on the left move it to >>the right? thus the spool valve would then have high pressure on the correct >>side ? You could, but you would have to reset the two pressure-relief valves (one should be set around 1200 and the other around 600), and swap the pressure switches. It's less work to just remove the spool valve and put it in the other way. Mike Reinath LNC2 360 at 840 hrs San Jose, CA (RHV)