Content-Type: text/plain;
charset=ISO-8859-1
Content-Disposition: inline
X-Mailing-List: lancair.list@olsusa.com

          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
>>
>I think my problem may be where the oil pressor sensor wire inserts into
the DPU since sometimes jiggling the
wires in that region seems to remedy the problem.   A friend says that
replacing the oil pressure sensor is one on the easiest things to do.   <

I wrote an article in the LNN about the Vision Micro DPU connectors.  The
article explained how the wire insulator could cause an intermittant
connection at the DPU..  Strip the wire insulation back further and your
oil pressure problems might go away.

Jim Frantz
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
LML website:   http://www.olsusa.com/Users/Mkaye/maillist.html
Builders' Bookstore:   http://www.buildersbooks.com/lancair

Please send your photos and drawings to marvkaye@olsusa.com.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>