Mailing List lml@lancaironline.net Message #47272
From: Zavatson, Christopher J (US SSA) <Christopher.Zavatson@baesystems.com>
Sender: <marv@lancaironline.net>
Subject: LNC-2 Spinner Cut Out
Date: Wed, 14 May 2008 18:38:51 -0400
To: <lml@lancaironline.net>
 
Randy,
I pulled attached pattern (pdf) from my spinner.  It is for a 360 with the 68" Hartzell.  It has a nice uniform 0.25 inch gap plus clearance for the 20 degree blade rotation.  It is best to cut a little small and then open up the hole.  Also check clearance through the range of pitch.
Chris
 
 
Chris Zavatson
N91CZ
360std
 
 
 
 
Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster