X-Virus-Scanned: clean according to Sophos on Logan.com Return-Path: Sender: To: lml@lancaironline.net Date: Thu, 08 May 2008 08:42:42 -0400 Message-ID: X-Original-Return-Path: Received: from bay0-omc2-s38.bay0.hotmail.com ([65.54.246.174] verified) by logan.com (CommuniGate Pro SMTP 5.2.3) with ESMTP id 2912801 for lml@lancaironline.net; Wed, 07 May 2008 19:19:04 -0400 Received-SPF: pass receiver=logan.com; client-ip=65.54.246.174; envelope-from=joscales98@hotmail.com Received: from hotmail.com ([207.46.11.140]) by bay0-omc2-s38.bay0.hotmail.com with Microsoft SMTPSVC(6.0.3790.3959); Wed, 7 May 2008 16:18:26 -0700 Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; Wed, 7 May 2008 16:18:25 -0700 X-Original-Message-ID: Received: from 75.81.226.134 by BAY124-DAV2.phx.gbl with DAV; Wed, 07 May 2008 23:18:21 +0000 X-Originating-IP: [75.81.226.134] X-Originating-Email: [joscales98@hotmail.com] X-Sender: joscales98@hotmail.com From: "Jim Scales" X-Original-To: "Lancair Mailing List" References: Subject: Re: [LML] VM1000 X-Original-Date: Wed, 7 May 2008 18:16:19 -0500 MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0036_01C8B06E.72A0A180" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: MSN 9 X-MimeOLE: Produced By MSN MimeOLE V9.50.0039.1900 Seal-Send-Time: Wed, 7 May 2008 18:16:19 -0500 X-OriginalArrivalTime: 07 May 2008 23:18:25.0414 (UTC) FILETIME=[A6732260:01C8B098] X-Original-Return-Path: joscales98@hotmail.com This is a multi-part message in MIME format. ------=_NextPart_000_0036_01C8B06E.72A0A180 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Hope this helps. Jim Scales ----------------------------------------------------------------- ENGINE HOURS RE-PROGRAMMING PROCEDURE FOR VM1000 =20 =20 =20 To re-load engine hours, follow the steps below: =20 =20 STEP 1 - 'Accessing Set Mode': With power off, press and hold buttons 1, = 3, 5 and then turn on power. Wait until the displays start reading out = values (takes about 15 seconds or less), then release buttons. =20 =20 STEP 2 - 'Selecting decade to change: Press button 4 once to move to the = next higher decade on the digital engine hours display area. There is = no visual indication of this, other than when you change the decade = value (STEP 3). Pressing the button moves the selection to the left = until it gets to the highest decade, after which the next press returns = you to the lowest decade. =20 STEP 3 - 'Changing the decade value': Press button 5 to increase the = decade value as desired. If you go over '9' it will carry to the next = decade. To erase the entire engine hours value, select the highest = decade and increase it until the display clears. Do this TWICE, then = proceed per steps 1 thru 3. =20 STEP 4 - When you are satisfied with what you see, shut off VM100. =20 =20 ----- Original Message -----=20 From: Bucky Whittier=20 To: lml@lancaironline.net=20 Sent: Wednesday, May 07, 2008 8:32 AM Subject: [LML] VM1000 I need change the battery in my VM1000. I tried the archives, but it = doesn't come up. Someone not to long ago post the replacement brand and = number of the battery needed. I would be very grateful if someone could = help me with this information and a supplier. I will have to deal with the tach hour recovery also, but first things = first. My VM1000 is nine years old and has been flawless. Thank you, Bucky Whittier=20 Truckee, Ca. LNC - 360 450hrs. ------=_NextPart_000_0036_01C8B06E.72A0A180 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable

Hope this=20 helps.

Jim Scales

----------------------------------------------------------------= -

ENGINE=20 HOURS RE-PROGRAMMING PROCEDURE FOR VM1000

To re-load engine = hours,=20 follow the steps below:

STEP 1 = =96 =91Accessing = Set Mode=92: With=20 power off, press and hold buttons 1, 3, 5 and then turn on power. Wait until the displays start = reading=20 out values (takes about 15 seconds or less), then release=20 buttons.

STEP = 2 =96 =91Selecting = decade to=20 change: Press button 4 once to move to the next higher decade on the = digital=20 engine hours display area. = There is=20 no visual indication of this, other than when you change the decade = value (STEP=20 3). Pressing the button = moves the=20 selection to the left until it gets to the highest decade, after which = the next=20 press returns you to the lowest decade.

STEP = 3 =96 =91Changing = the decade=20 value=92: Press button 5 to increase the decade value as desired. If you go over =919=92 it will = carry to the=20 next decade. To erase the = entire=20 engine hours value, select the highest decade and increase it until the = display=20 clears. Do this TWICE, = then proceed=20 per steps 1 thru 3.

STEP = 4 =96 When you are = satisfied=20 with what you see, shut off VM100.

----- Original Message -----

From: Bucky=20 Whittier

To: lml@lancaironline.net

Sent: Wednesday, May 07, 2008 = 8:32=20 AM

Subject: [LML] VM1000

I need change the = battery in my=20 VM1000. I tried the archives, but it doesn=92t come up. Someone not to = long ago=20 post the replacement brand and number of the battery needed. I would = be very=20 grateful if someone could help me with this information and a=20 supplier.

I will have to deal with = the tach=20 hour recovery also, but first things first. My VM1000 is nine years = old and=20 has been flawless.

Thank=20 you,

Bucky Whittier=20

Truckee, Ca. LNC=20 - 360 =20 450hrs.

------=_NextPart_000_0036_01C8B06E.72A0A180--