|
Just a little
warning for everyone out there doing the WAAS upgrade, when the unit is upgraded
all your data port assignments will be removed. There is a procedure to view the
assignments and it is best to write them down so you can reassign after the
upgrade. Even without the upgrade this is good information to have in case of a
system failure. If your panel was built at Lancair then all this information is
already on file here and we can give you the assignments.
Viewing data port
assignments per Garmin : With power applied to the aviation rack and the unit
turned off, press and hold the ENT key and turn the unit on. Release the ENT key
when the display activates. After the Data Base and Instrument Panel Self Test
pages, the first page displayed is the MAIN ARINC 429 CONFIG page. While in
Configuration Mode, pages can be selected by ensuring the cursor is off and
rotating the small right knob. To change data on the displayed config pages,
press the small right knob to turn on the cursor. Turn the large right knob to
change between data fields. Turn the small or large right knob to change a field
that the cursor is on. Once you have made the desired selection, press the ENT
key to accept the entry.
Jeremy M. Roach
Avionics Technical Advisor/
Trainer
Lancair Avionics
2244
Airport Way
Redmond
Oregon 97756
Tel.
(541) 923-2244
Fax.
(541) 923-2255
|