Return-Path: <lancair.list-request@olsusa.com>
Received: from cdihost.cdicorp.com ([207.79.152.5]) by truman.olsusa.com
          (Post.Office MTA v3.5.1 release 219 ID# 0-52269U2500L250S0V35)
          with SMTP id com for <lancair.list@olsusa.com>;
          Fri, 7 Jan 2000 13:25:00 -0500
Received: from JUPITER by cdihost.cdicorp.com
          via smtpd (for ns1.olsusa.com [205.245.9.2]) with SMTP; 7 Jan 2000 18:29:59 UT
Received: from cdim-pts-mail.cdicorp.com (CDIM-PTS-MAIL [172.17.131.3]) by jupiter.cdicorp.com with SMTP (Microsoft Exchange Internet Mail Service Version 5.5.2650.21)
	id CF1LHNFG; Fri, 7 Jan 2000 13:29:59 -0500
Received: by CDIM-PTS-MAIL with Internet Mail Service (5.5.2448.0)
	id <CNV76YYV>; Fri, 7 Jan 2000 13:27:16 -0500
Message-ID: <FDD045B6B83FD311A9880090273053E20B6591@CDIM-PTS-MAIL>
From: "Rumburg, William" <wrumburg@cdicorp.com>
To: "'lancair.list@olsusa.com'" <lancair.list@olsusa.com>
Subject: FW: LNC2 Rudder Pedal Location
Date: Fri, 7 Jan 2000 13:27:15 -0500 
X-Mailing-List: lancair.list@olsusa.com
Mime-Version: 1.0

          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> 
>>

> You simply capture the shank of a male rod end bearing between
> the cable adjusters and drill 3/16" holes through the shank of the rod end
> bearing (holes are already pre-drilled in the cable adjusters). 
> 
Oops!! I should have written FEMALE rod end bearing. I'm writing all this
from recollection and don't have references handy, but I believe the rod end
bearing to use is an HFE-3.
Bill Rumburg
N403WR  (Sonic bOOm) 
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
LML website:   http://www.olsusa.com/Users/Mkaye/maillist.html
Builders' Bookstore:   http://www.buildersbooks.com/lancair

Please send your photos and drawings to marvkaye@olsusa.com.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>