Return-Path: Received: from imo20.mx.aol.com ([152.163.225.10]) by truman.olsusa.com (Post.Office MTA v3.5.1 release 219 ID# 0-52269U2500L250S0V35) with ESMTP id com for ; Fri, 7 Jan 2000 12:18:58 -0500 Received: from RWolf99@aol.com by imo20.mx.aol.com (mail_out_v24.6.) id k.cf.cf6e3619 (3314) for ; Fri, 7 Jan 2000 12:23:53 -0500 (EST) From: RWolf99@aol.com Message-ID: Date: Fri, 7 Jan 2000 12:23:52 EST Subject: LNC2 Rudder Pedal Location To: lancair.list@olsusa.com X-Mailing-List: lancair.list@olsusa.com Mime-Version: 1.0 <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> << Lancair Builders' Mail List >> <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> >> I'm about to build my subfloor and install the adjustable rudder pedal assembly. Unfortunately, I don't have my seats in yet, so I can't sit down and put my feet on the pedals to verify that I have them properly located side-to-side. Can I assume that a fore-aft line perpendicular to the firewall (also perpendicular to the front face of the front spar) that goes thru the control stick gives the proper side-to-side location? Or do I really have to install the seats before I'm sure? Rob Wolf >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> LML website: http://www.olsusa.com/Users/Mkaye/maillist.html Builders' Bookstore: http://www.buildersbooks.com/lancair Please send your photos and drawings to marvkaye@olsusa.com. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>