Return-Path: Received: from ds9.camcare.com ([206.193.116.3]) by truman.olsusa.com (Post.Office MTA v3.5.1 release 219 ID# 0-52269U2500L250S0V35) with ESMTP id com for ; Tue, 28 Dec 1999 12:46:52 -0500 Received: by ds9.camcare.com with Internet Mail Service (5.5.2650.21) id ; Tue, 28 Dec 1999 12:51:53 -0500 Message-ID: <3F7551691AE6D111838800A024BAF5390BD607@nelix.camcare.com> From: "Silverstein, Sam" To: "'lancair.list@olsusa.com'" Subject: ES nose wheel shimmy Date: Tue, 28 Dec 1999 12:51:19 -0500 X-Mailing-List: lancair.list@olsusa.com Mime-Version: 1.0 <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> << Lancair Builders' Mail List >> <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> >> Hello, are there any ES builders (flying) who are having nose wheel shimmy issues ? I have reviewed the historical posts for possible suggestions but have not come up with a good fix yet. Maintaining tire pressures ( 30# nose and 40# mains, also 400# nitrogen in the nose strut.) seems to have the most effect, but doesn't eliminate the shimmy completely. Higher pressures are definitely not the way to go (i.e. violent shimmy.) Just a thought, but looking at all the Piper's and Cessna's on the ramp, I note the nose struts are canted appx.16 deg. forward, vs. the 1 1/2 deg. of the ES strut. Would modifying the angle affect the shimmy issue?Any suggestions welcome and thanks in advance. Also, what is the correct identifier for the ES? And finally, I have lost my hanger space at the local FBO and no place to work on my ES (time issues also). Can anyone recommend a shop (in the east) for primarily composite / paint work (mostly minor / touch up things, but a lot of them). Sam Silverstein ES N888L >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> LML website: http://www.olsusa.com/Users/Mkaye/maillist.html Builders' Bookstore: http://www.buildersbooks.com/lancair >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>