Posted for "Timothy Ong" <timothy.ong@leadingedgeaircraft.com>:

 Yes Craig,
 
 We have a conversion for the IV gear legs to retrofit to stainless hard
 lines and a flexible Teflon braded line to connect to the hard lines.

 Regards,
 
 Timothy Ong

 Call Michelle at Aerocraft parts.

"""
 One final question if you know - the common thread was that the DH lines
 were great but the fitting could not fit past the gear trunion to the brake.
 It was easier to use Stainless in the gear leg itself because it could be
 swaged after it passed the gear trunion on the way down the gear leg.
 
 Do you know if that is available from Lancair?
 
 Thanks
 
 Craig Blitzer
"""