Kevin,
Thanks again for all of your effort.
One thing to keep in mind though what another Lancair builder  posted ( I forgot who) and that is the DH lines seemed to be very  reasonable if one ordered already made lengths as opposed to a  "custom" length.
One final question if you know - the common thread was that the DH  lines were great but the fitting could not fit past the gear  trunion to the brake.  It was easier to us Stainless in the gear  leg itself because it could be swaged after it passed the gear  trunion on the way down the gear leg.
Do you know if that is available from Lancair?
Thanks
Craig Blitzer