X-Virus-Scanned: clean according to Sophos on Logan.com X-SpamCatcher-Score: 1 [X] Return-Path: Sender: To: lml Date: Tue, 13 Feb 2007 18:41:36 -0500 Message-ID: X-Original-Return-Path: Received: from ms-smtp-01.southeast.rr.com ([24.25.9.100] verified) by logan.com (CommuniGate Pro SMTP 5.1.6) with ESMTP id 1835989 for lml@lancaironline.net; Tue, 13 Feb 2007 18:40:22 -0500 Received-SPF: pass receiver=logan.com; client-ip=24.25.9.100; envelope-from=cblitzer@triad.rr.com Received: from YOUR85A8F7B8EC (cpe-065-190-066-055.triad.res.rr.com [65.190.66.55]) by ms-smtp-01.southeast.rr.com (8.13.6/8.13.6) with SMTP id l1DNdEpG026608 for ; Tue, 13 Feb 2007 18:39:18 -0500 (EST) X-Original-Message-ID: <006101c74fc8$2ba7cfe0$1102a8c0@YOUR85A8F7B8EC> From: "cblitzer" X-Original-To: "Lancair Mailing List" References: Subject: Re: [LML] Re: DH Lines X-Original-Date: Tue, 13 Feb 2007 18:39:13 -0500 MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_005E_01C74F9E.420E50D0" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2900.3028 X-MIMEOLE: Produced By Microsoft MimeOLE V6.00.2900.3028 X-Virus-Scanned: Symantec AntiVirus Scan Engine This is a multi-part message in MIME format. ------=_NextPart_000_005E_01C74F9E.420E50D0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Kevin, Thanks again for all of your effort. One thing to keep in mind though what another Lancair builder posted ( I = forgot who) and that is the DH lines seemed to be very reasonable if one = ordered already made lengths as opposed to a "custom" length. One final question if you know - the common thread was that the DH lines = were great but the fitting could not fit past the gear trunion to the = brake. It was easier to us Stainless in the gear leg itself because it = could be swaged after it passed the gear trunion on the way down the = gear leg. Do you know if that is available from Lancair? Thanks Craig Blitzer --- Original Message -----=20 From: Kevin Kossi=20 To: lml@southeast.rr.com=20 Sent: Tuesday, February 13, 2007 6:16 PM Subject: [LML] Re: DH Lines Regarding the DH Line sets: IV owners: Pat Cohenour, Bill George, Craig B., Bill Harrelson & Bill = Edwards Legacy owners: Dan Ballin and Ken Rice=20 235 owner Bob Mackey I just spoke to Tim Ong at Lancair, he spoke to DH lines, and said = they would not give Lancair Parts a discount on the line sets at the = quantities we have, and therefor they would like us to order them directly from DH. Tim did say that he has an ES and the lines are similar to the IV & = IV-P and that he would measure them and give us the measurements. However the rear lines are all different, depending on what location = one adapts from metal to flexible lines. So to be sure one should = measure them themselves. As for the new builders, he suggested using the Nylaflow lines as = templates to get the exact measurements and then order the lines from = there. The fittings are the standard straight # 4's. Sorry I was not able to put this all together. If we want the DH lines = we are going to have to roll up our sleeves on this one. Kevin Kossi ------=_NextPart_000_005E_01C74F9E.420E50D0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
Kevin,
Thanks again for all of your = effort.
One thing to keep in mind though what = another=20 Lancair builder posted ( I forgot who) and that is the DH = lines=20 seemed to be very reasonable if one ordered already made lengths as = opposed=20 to a "custom" length.
One final question if you know - the = common thread=20 was that the DH lines were great but the fitting could not fit past the = gear=20 trunion to the brake.  It was easier to us Stainless in the = gear leg=20 itself because it could be swaged after it passed the gear trunion on = the way=20 down the gear leg.
Do you know if that = is available from Lancair?
Thanks
Craig Blitzer
 
--- Original Message -----
From:=20 Kevin Kossi
Sent: Tuesday, February 13, = 2007 6:16=20 PM
Subject: [LML] Re: DH = Lines

Regarding the=20 DH Line sets:
IV=20 owners: Pat Cohenour, Bill George, Craig B., Bill=20 Harrelson & Bill Edwards


Legacy owners: Dan Ballin and Ken=20 Rice 

235 = owner Bob=20 Mackey
I = just spoke to=20 Tim Ong at Lancair, he spoke to DH lines, and said they = would not=20 give Lancair Parts a discount on the line sets at the quantities = we=20 have,
and = therefor=20 they would like us to order them directly from=20 DH.
Tim = did say that=20 he has an ES and the lines are similar to the IV & IV-P and that = he would=20 measure them and give us the measurements.
However the rear=20 lines are all different, depending on what location one adapts from = metal=20 to flexible lines. So to be sure one should measure them=20 themselves.
As = for the new=20 builders, he suggested using the Nylaflow lines as templates to get = the exact=20 measurements and then order the lines from there. The fittings are=20 the standard straight # 4's.
Sorry I was not=20 able to put this all together. If we want the DH lines we are going to = have to=20 roll up our sleeves on this one.
Kevin=20 Kossi
------=_NextPart_000_005E_01C74F9E.420E50D0--