Regarding the DH Line sets:
IV owners: Pat Cohenour, Bill George, Craig B., Bill Harrelson & Bill Edwards
Legacy owners: Dan Ballin and Ken Rice 235 owner Bob Mackey
I just spoke to Tim Ong at Lancair, he spoke to DH lines, and said they would not give Lancair Parts a discount on the line sets at the quantities we have, and therefor they would like us to order them directly from DH. Tim did say that he has an ES and the lines are similar to the IV & IV-P and that he would measure them and give us the measurements. However the rear lines are all different, depending on what location one adapts from metal to flexible lines. So to be sure one should measure them themselves. As for the new builders, he suggested using the Nylaflow lines as templates to get the exact measurements and then order the lines from there. The fittings are the standard straight # 4's.
Sorry I was not able to put this all together. If we want the DH lines we are going to have to roll up our sleeves on this one.
Kevin Kossi |