<<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
>>
To Bobby and others,

Dan wrote:
<< ........... "going into reflex" means running your flaps up about 7
 degrees above the faired position and conversely, "going out of reflex"
 means running them back down to neutral once you slow down to prepare for
 landing or other slow-speed manuever.
  .......>>
To avoid any confusion:
In a Lancair 320/360, the 7 degree up "reflex" position is the "faired in"
position for cruise flight.
I believe the 235 "faired in" position is "neutral" and the flap is reflexed
up out of the "faired in" position during cruise.  Perhaps a 235 pilot could
clarify this.
I regularly use movement to the "neutral" flap position on my 320 to knock
10-15 knots off a throttle reduction and bring the nose back down when below
130 or so knots.  This is done knowing I have the beefier 5/16ths push rods
to eliminate their being bent, and a healthy concern for the twisting-moment
applied to the flap itself since the push rod is applying force to only the
inboard end of a very long flap.(Note: Luckily, I built my flaps with the
then approved Safety-Poxy.)
Scott Krueger
N92EX

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
LML website:   http://www.olsusa.com/Users/Mkaye/maillist.html
Builders' Bookstore:   http://www.buildersbooks.com/lancair
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>