Sender: <marv@lancaironline.net>
To: lml
Date: Wed, 04 Oct 2006 20:19:52 -0400
Message-ID: <redirect-1442105@logan.com>
Received-SPF: pass
 receiver=logan.com; client-ip=24.25.9.102; envelope-from=cblitzer@triad.rr.com
From: "cblitzer" <cblitzer@triad.rr.com>
References: <list-1441479@logan.com>
Subject: Re: [LML] Re: torque specs
MIME-Version: 1.0
Content-Type: text/plain;
	format=flowed;
	charset="iso-8859-1";
	reply-type=response
Content-Transfer-Encoding: 7bit

Tom,
Thanks very much.
Craig
----- Original Message ----- 
From: "Marvin Kaye" <marv@lancaironline.net>
To: "Lancair Mailing List" <lml@lancaironline.net>
Sent: Wednesday, October 04, 2006 1:47 PM
Subject: [LML] Re: torque specs


> Posted for "Tom Gourley" <tom.gourley@verizon.net>:
>
>  Craig B wrote:
>  """
> Can someone please tell me what the torque specs are for the engine 
> mounting
> bolts? (where mounts attaches to firewall)
> """
>  For the Legacy, according to the most recent manual I have, the firewall 
> bolt
> specs are:
>  AN4 bolts 4.17 - 5.83 ft-lbs (50.04 - 69.96 in-lbs).  AN7 bolts 37.5 - 
> 41.2
> ft-lbs (450 - 494.4 in-lbs).
>  While the manual lists the torque for the Lycoming 540 and Continental 
> 550 on
> different pages the specs are the same.  I'd recommend using a 1 foot 
> wrench.
>  Getting nearly 500 lbs onto a 1 inch wrench could be pretty tough :-)
>  Tom Gourley
>
> --
> For archives and unsub http://mail.lancaironline.net/lists/lml/
>