Kevin
How my stick is set up (embedded below).
From: Lancair Mailing List [mailto:lml@lancaironline.net] On Behalf Of Kevin Kossi
Sent: Monday, August 07, 2006
10:04 PM
To: Lancair
Mailing List
Subject: [LML] Re: Military Style
Control Stick Grip Assignments
I have a question for those experienced with the InfinityMilitary Style
Control Stick Grips.
I need to decide what button/switchcontrols what and what type of
button/switch.
This is what I have come up with:
1.BlackChina Hat
-Two-Axis (thumb operated) 4-way switch ( N.O. SPST ): Up & down -Pitch Trim, Right and left -
Rudder Trim
Ditto, except right/left
I have used as aileron trim. I find if I keep the gas within ~ 10 gallons I do
not use this a lot, but rudder trim is only used on takeoff and landing.
2.Red(Index finger operated) Trigger Switch (
N.O. SPDT: Push-To-Talk (PTT)
3.Red (thumb operated) Toggle Switch on the thumb
side of the China Hat: [ON]/OFF/[ON] SDPT Toggle Switch: brackets around the word
*ON* [ (ON) ] in the Toggle Switch descriptions above means that the toggle
switch is momentary in that direction:Flaps
Momentary
Toggle – up swap frequencies on top radio, down swap frequencies on bottom
radio
4)Black Tactical (thumb
operated) Pushbutton half way down the grip (thumb) side :ON/OFF SPDTAutopilot Engage/Disengage
5)Blue Tactical (pinky finger operated)
bottom Pushbutton :ON/OFF SPDT Pushbutton:Fuel
Pump
Momentary
Toggle – up swap com 1 and 2, down spare ( I had hoped to swap from com
to nav on radio 2, but could not do it)
6)Green (thumb operated) Tactical Pushbutton
on knuckle side of the China Hat:[ON]/OFF/[ON] SDPT Toggle Switch: brackets
around the word *ON* [ (ON) ] in the Toggle Switch descriptions above means
that the toggle switch is momentary in that direction:Speed Brakes
Momentary
Toggle – left and right rudder trim, I do not have speed brakes.
What would be nice somewhere is a button to switch preprogramed radio
frequencies, I could replace the Fuel Pump with that?
Ohh, and what to do about thepassenger stick? I will be havingdual
Rudder/Break Pedals I guess I should do the same there?