Mailing List lml@lancaironline.net Message #35435
From: Rob Logan <Rob@Logan.com>
Subject: [Fwd: Flap fences]
Date: Tue, 25 Apr 2006 00:28:42 -0400
To: <lml@lancair.net>
 Message Header

Undecoded Message
-------- Original Message --------
Return-Path: <elippse@sbcglobal.net>

The inboard and outboard flap fences are shown in 9281 and 9272. The
cowl flap T-handle is shown in 9277 in the extended (flap closed)
position. Finally 9290 shows my rotisserie setup to rotate my modified
carbon spinner after applying micro or primer. The fan blows on the
three aluminum blades making the spinner rotate at about 60-100rpm. The
1000W heater helps the resin or primer set-up. The spinner is mounted to
the backing plate, which is mounted to the 4" extension, which has
open-frame ball bearings mounted in each end. This set-up allows me to
also balance the spinner.
Image
DSCN9272.JPG
Image
DSCN9277.JPG
Image
DSCN9281.JPG
Image
DSCN9290.JPG
Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster