<<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
>>
Actually, the ARTCC or TRACON controllers don't really care what you call
the airplane, and most don't know what a Lancair is anyway.  If you file a
flight plan via DUATS, you must use the type A/C that is adapted in the FAA
data base, or the flight plan will be rejected.  So if you file as a LC2, it
will be rejected, and you must use LNC2.  The airplanes performance
characteristics are also entered into the FAA data base, so the computers
can keep up with the mode C.  For example, if you enter a type AC as a C172,
but the AC is actually an F16, when the AC is climbing or descending at
8000FPM, the mode C readout on the radar scope will read XXX, and the
computer can't keep up.  If the computer knows it's an F16, then it will
anticipate the high climb rate, and usually keep the mode C readout.  The
Center, or Tower computers will accept just about anything as a type AC, so
the only problem you will have is if you file via DUATS.
If you are ever flying through Denver Center, say hi  :-)   I've been a
controller for 17 years, and am just starting a Super ES.

Ron Galbraith (RG)
ATP, CFII, A&P, GI, ATCS
LNCE - N5ES

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
LML website:   http://www.olsusa.com/Users/Mkaye/maillist.html