X-Virus-Scanned: clean according to Sophos on Logan.com Return-Path: Sender: To: lml@lancaironline.net Date: Sun, 11 Dec 2005 10:27:56 -0500 Message-ID: X-Original-Return-Path: Received: from web81502.mail.mud.yahoo.com ([68.142.199.142] verified) by logan.com (CommuniGate Pro SMTP 5.0.3) with SMTP id 871317 for lml@lancaironline.net; Sun, 11 Dec 2005 08:27:03 -0500 Received-SPF: none receiver=logan.com; client-ip=68.142.199.142; envelope-from=kneadedpleasures@sbcglobal.net Received: (qmail 83412 invoked by uid 60001); 11 Dec 2005 13:26:17 -0000 DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=sbcglobal.net; h=Message-ID:Received:Date:From:Subject:To:MIME-Version:Content-Type:Content-Transfer-Encoding; b=GOfNAbLFh6AoWUIAYlFaNDbQ+aC05AkJz5ynkKmFi86QY0Cs0E5z2dEvnnSYCpMUtXuBkDqM5oOV+s38NmxJrv8tbZTFzcuReNvMQWEbw/ijPOqUjf/XBmCEvZCodT0tCnX/sS2zg1foL0KEvE4W2PdXkTmXXdRUMEDp+nz8iKE= ; X-Original-Message-ID: <20051211132617.83410.qmail@web81502.mail.mud.yahoo.com> Received: from [71.145.138.79] by web81502.mail.mud.yahoo.com via HTTP; Sun, 11 Dec 2005 05:26:17 PST X-Original-Date: Sun, 11 Dec 2005 05:26:17 -0800 (PST) From: kneaded pleasures Subject: Body Work X-Original-To: lml@lancaironline.net MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="0-1135305740-1134307577=:82050" Content-Transfer-Encoding: 8bit --0-1135305740-1134307577=:82050 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Craig: Mix about 20% (by volume) of micro balloons into your WLS sandable primer paint to make it even more filling of light scratches and small holes. Further, apply two or three coats of this "extended" primer at 15 minute intervals to permit the solvents to dry somewhat so that the paint stays where you spray it. You will have to use a larger orifice on the spray head but this technique should save you time because you can prime and sand just once or twice instead of 20 times as I did before I learned this trick. Greg Nelson --0-1135305740-1134307577=:82050 Content-Type: text/html; charset=iso-8859-1 Content-Transfer-Encoding: 8bit
Craig:  Mix about 20% (by volume) of micro balloons into your WLS sandable primer paint to make it even more filling of light scratches and small holes.  Further, apply two or three coats of this "extended" primer at 15 minute intervals to permit the solvents to dry somewhat so that the paint stays where you spray it.  You will have to use a larger orifice on the spray head but this technique should save you time because you can prime and sand just once or twice instead of 20 times as I did before I learned this trick.    Greg Nelson
--0-1135305740-1134307577=:82050--