<<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
>>
I am about to install the brake and gear hydraulic lines as well as the fuel
lines in the under seat area.

At present I have a clean sheet of paper as it were and am anxious not to
end up doing the job more than once!

The configuration of the aircraft will be as follows

1.    Wing tip strobes with power pack under seat
2.    No header tank with fuel lines from each wing running to a
left/right/off fuel cock to be located between the  seats.  This will be an
Andair cock. The final position is yet to be established.
        .
3.    S-Tec System 20 servo to be located under seat..  I believe that
someone has already commented on    the  fact that he had to tear out the
some of the piping to get the servo in.
.

Any help I can get from those who have passed this way before would be
appreciated in helping me arrive at a final layout without too much anguish
.

In advance many thanks

Ian Crowe

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
LML homepage:   http://www.olsusa.com/Users/Mkaye/maillist.html