Sender: <marv@lancaironline.net>
To: lml@lancaironline.net
Date: Wed, 13 Jul 2005 13:12:16 -0400
Message-ID: <redirect-1055099@logan.com>
Received-SPF: pass
 receiver=logan.com; client-ip=24.25.9.102; envelope-from=sreeves@sc.rr.com
From: "S. Reeves" <sreeves@sc.rr.com>
Subject: Mode C
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"; format=flowed

	Can someone describe the intricacies of Mode C?  I didn't install my 
original panel, but I have done many upgrades (I did not install the Mode 
C).  I have had it fail before and the avionics shop repaired it.  It 
failed again a few months ago and I removed the King box and replaced 
it.  I heard something rattling around in it, so I went ahead and replaced 
it.  I figured at 150 bucks from Spruce it would be worth a shot to see if 
that was the problem as opposed to having to fly it to my closest avionics 
shop an hour flight away and having to leave the airplane, get a ride back, 
etc etc.  Well needless to say, that's not the problem and I was wondering 
if you guys had any suggestions.  I haven't had it tested with any ground 
equipment, but ATC does not receive my Mode C.  It failed during a trip a 
few months ago.  Thanks for any input.

Steve Reeves
Glasair 1FT 38SR