X-Virus-Scanned: clean according to Sophos on Logan.com Return-Path: Sender: To: lml@lancaironline.net Date: Sat, 14 May 2005 10:36:27 -0400 Message-ID: X-Original-Return-Path: Received: from imo-m27.mx.aol.com ([64.12.137.8] verified) by logan.com (CommuniGate Pro SMTP 4.3c5) with ESMTP id 943761 for lml@lancaironline.net; Sat, 14 May 2005 10:30:36 -0400 Received-SPF: pass receiver=logan.com; client-ip=64.12.137.8; envelope-from=Sky2high@aol.com Received: from Sky2high@aol.com by imo-m27.mx.aol.com (mail_out_v38_r1.7.) id q.13d.13414b94 (3310) for ; Sat, 14 May 2005 10:29:46 -0400 (EDT) From: Sky2high@aol.com X-Original-Message-ID: <13d.13414b94.2fb7655a@aol.com> X-Original-Date: Sat, 14 May 2005 10:29:46 EDT Subject: Re: [LML] Re: Plasma III on Hi Compression Engines - Fuselage Install Notes X-Original-To: lml@lancaironline.net MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="-----------------------------1116080986" X-Mailer: 9.0 Security Edition for Windows sub 5000 -------------------------------1116080986 Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit In a message dated 5/14/2005 8:34:16 A.M. Central Standard Time, alainoireaux@club-internet.fr writes: can you say me where you have connected the 1K resistor on your LSE left controller ? I mean on which pin,13 or 14/15 on the input connector ? I am installing a double Plasma II+ LSE ignition system AND a VM 1000 in my L 320 ....I have seen with pleasure this systems work fine for you. Best regards. Alain, Resistor and diode (cathode) to input connector pin 6 and the other end of the resistor to pin 13. Note that when you turn off the ignition connected to the VM system, you will probably see the tach time displayed (it does that on my VM EPI 800) in place of the RPM since there is no signal. That is why I will wire both ignition system's tach output thru a selector switch to the VM (in the future) - so that I can get a RPM display when only one ignition is running. Scott Krueger AKA Grayhawk Lancair N92EX IO320 SB 89/96 Aurora, IL (KARR) -------------------------------1116080986 Content-Type: text/html; charset="US-ASCII" Content-Transfer-Encoding: quoted-printable

In a message dated 5/14/2005 8:34:16 A.M. Central Standard Time,=20 alainoireaux@club-internet.fr writes:

<= FONT=20 style=3D"BACKGROUND-COLOR: transparent" face=3DArial color=3D#000000 size= =3D2>can you=20 say me where you have connected the 1K resistor on your LSE left=20
controller ? I mean on which pin,13 or 14/15 on the input connector ?<= BR>I=20 am installing a double Plasma II+ LSE ignition system AND a VM 1000 in my=20 L 320 ....I have seen with pleasure this systems work fine for you.
Bes= t=20 regards.

Alain,

Resistor and diode (cathode) to input connector pin 6 and the othe= r=20 end of the resistor to pin 13. Note that when you turn off the ignitio= n=20 connected to the VM system, you will probably see the tach time displayed (i= t=20 does that on my VM EPI 800) in place of the RPM since there is no signal.&nb= sp;=20 That is why I will wire both ignition system's tach output thru a selec= tor=20 switch to the VM (in the future) - so that I can get a RPM display when only= one=20 ignition is running.=20

Scott Krueger=20 AKA Grayhawk
Lancair N92EX IO320 SB 89/96
Aurora, IL=20 (KARR)

-------------------------------1116080986--