lml@lancaironline.net Mailing List Archive

In a message dated 4/26/2005 9:32:18 A.M. Central Standard Time, marv@lancaironline.net writes:

I replaced my LASAR system with dual Plasma IIIs on my 10:1 360 and it
works
fine. Klaus recommends putting the lead magnets at 40 rather than 45 degrees,
which I did. I also use the plugs he recommends.

John,

Nice write up and experience. I am in the process of changing from the LASAR system to the Plasma III system. I have had very disappointing results with the LASAR system even though I tried an O320, O360 and IO360 controller on my IO320 with 9:1 pistons. The LASAR system still uses Slick Mags with all the inherent problems. I can't wait to start testing the Plasma III system.

Scott Krueger AKA Grayhawk
Lancair N92EX IO320 SB 89/96
Aurora, IL (KARR)

Fair and Balanced Opinions at No Charge!
Metaphysical Monologues used at your own Risk.