Posted for "Dominic V. Crain" <domcrain@pacific.net.au>:

 Thanks Ray for the info.
 Dom
 

"""
 I don't have any pictures but I just got done putting a set on my bird.
 If you follow the instructions the installation is very straight foward.
 A couple of pointers: There will be some side to side movement on both
 the upper and lower attach bolt for free movment on compression.  Once
 installed and before the retract test, bonce the plane to get some
 compression and extension on the shocks.  Then manually push the gear
 into the well to check for clearence.   If you did not get the length
 exactly right the manual cycle will allow you to correct the problem
 without causing any damage.  The shock will be at full extension when it
 retracks into the well.
"""